CCPSH - BLACK PEARL GREASE EP NLGI 2, CPS254591
- MSDS: CCPSH
- Manufacturer: CHEVRON
- Product Name: BLACK PEARL GREASE EP NLGI 2, CPS254591
- National Stock Number: 9150-00N073791
Product Identification
Product ID:BLACK PEARL GREASE EP NLGI 2, CPS254591
MSDS Date:12/03/1991
FSC:9150
NIIN:00N073791
MSDS Number: CCPSH
Responsible Party
US
Emergency Phone: 800-582-3835
Info Phone: 800-582-3835
Cage: 0AHD1
Contractor
Telephone: 800-582-3835
Cage: 0AHD1
Ingredients
LUBRICATING BASE OIL (MULTIPLE CAS# INVOLVED) (CONTAINING
Fraction By Weight: >75%
OSHA PEL N/K
ACGIH TLV: N/K
MINERAL OIL, PETROLEUM DISTILLATES, SOLVENT-REFINED
CAS: 64741-96-4
RTECS: PY8040001
OSHA PEL 5 MG/M3 (MFR)
ACGIH TLV: 5 MG/M3 (MFR)
MINERAL OIL, PETROLEUM DISTILLATES, HYDROTREATED (SEVERE)
CAS: 64742-52-5
RTECS: PY8035001
OSHA PEL 5 MG/M3 (MFR)
ACGIH TLV: 5 MG/M3 (MFR)
MINERAL OIL, PETROLEUM DISTILLATES, HYDROTREATED (SEVERE)
CAS: 64742-54-7
RTECS: PY8035501
OSHA PEL 5 MG/M3 (MFR)
ACGIH TLV: 5 MG/M3 (MFR)
ADDITIVES (INCLUDING INGS 6 & 7)
Fraction By Weight: <25%
OSHA PEL N/K
ACGIH TLV: N/K
CALCIUM HYDROXIDE
CAS: 1305-62-0
RTECS: EW2800000
Fraction By Weight: 15%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 5 MG/M3
POLY (1,2-DIHYDRO-2,2,4-TRIMETHYLQUINOLINE);
CAS: 26780-96-1
RTECS: TQ2625000
Fraction By Weight: 0.2%
OSHA PEL N/K
ACGIH TLV: N/K
DRIVING FORCE, MATL INJECTED INTO FINGERTIP CAN BE
RTECS: 9999999ZZ
USUALLY A GREAT DEAL OF SWELLING, DISCOLORATION &
RTECS: 9999999ZZ
EMERGENCY CENTER IS RECOMMENDED.
RTECS: 9999999ZZ
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE/SKIN CONT:THIS SUBSTANCE IS NOT
EXPECTED TO CAUSE PRLNG/SIGNIFICANT IRRIT. THIS HAZ EVAL IS BASED
ON DATA FROM SIMILAR MATLS. DERMAL TOX/INHAL/INGEST:SYSTEMIC TOX OF
THIS SUBSTANCE HAS NOT BEEN DE TERMINED. HOWEVER, IT SHOULD BE
PRACTICALLY NON-TOX TO INTERNAL ORGS IF IT GETS ON SKIN, IS
INHALED/IS (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:SWALLOWED. THIS HAZ EVAL IS BASED ON
DATA FROM SIMILAR MATLS. HIGH-PRESS EQUIP INFO:ACCIDENTAL
HIGH-VELOCITY INJECTION UNDER SKIN OF MATLS OF THIS TYPE MAY RSLT
IN SERIOUS INJURY. SEEK MED AT TN AT ONCE SHOULD ACCIDENT LIKE THIS
OCCUR. INITIAL WOUND AT INJECTION SITE MAY NOT APPEAR TO BE SERIOUS
AT (SUPP DATA)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHAL:REMOVE FROM EXPOS. SUPPORT BRTHG (GIVE ARTF RESP/O*2) .
INGEST:CALL MD IMMED . EYES:FLUSH W/FRESH WATER FOR AT LST 15 MINS.
REMOVE CONT LENSES IF WORN. SKIN:WASH THORO W/SOAP & WATER . REMOVE
& WASH CONTAM CLTHG. NOTE TO MD:IN AN ACCIDENT INVOLVING HIGH-PRESS
EQUIP, THIS PROD MAY BE INJECTED UNDER SKIN. SUCH AN ACCIDENT MAY
RSLT IN SM, SOMETIMES BLOODLESS, PUNCTURE WOUND. (SUPDAT)
Fire Fighting
Extinguishing Media:CO*2, DRY CHEMICAL, FOAM & WATER FOG.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Accidental Release
Spill Release Procedures:THIS MATERIAL IS NOT EXPECTED TO PRESENT ANY
ENVIRONMENTAL PROBLEM. CLEAN UP SPILLS IMMEDIATELY, OBSERVING
PRECAUTIONS IN PROTECTIVE EQUIPMENT SECTION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:AVOID PROLONGED OR FREQUENTLY REPEATED
SKIN CONTACT W/THIS MATERIAL. READ THE ENTIRE DOCUMENT & LABEL
BEFORE USING THIS PRODUCT.
Other Precautions:DO NOT WELD, HEAT OR DRILL CONTAINER. RESIDUE MAY
IGNITE W/EXPLOSIVE VIOLENCE IF HEATED SUFFICIENTLY. CAUTION! DO NOT
USE PRESSURE TO EMPTY DRUM OR DRUM MAY RUPTURE WITH EXPLOSIVE
FORCE.
Exposure Controls
Respiratory Protection:NIOSH APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN . NO SPECIAL RESPIRATORY PROTECTION IS NORMALLY
REQUIRED.
Ventilation:NO SPECIAL VENTILATION IS NECESSARY.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:ANSI APPROVED EYE WASH FOUNTAIN & DELUGE
SHOWER . SKIN CONTACT CAN BE MINIMIZED BY WEARING PROTECTIVE
CLOTHING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
HAZ DECOMP PROD:CARBON MONOXIDE. EFTS OF OVEREXP:FIRST; BUT, IF LEFT
UNTREATED, COULD RSLT IN DISFIGUREMENT/AMPUTATION OF AFFECTED PART.
THIS PROD CNTNS PETRO BASE OILS WHICH MAY BE REFINED BY VARIOUS
PROCESSES INCL SEV SOLV EXTRACTION, SEV HYDROCRACKING/SEV
HYDROTREATING. FIRST AID PROC:HOWEVER, BECAUSE OF ITS (ING 8)
Chemical Properties
Melt/Freeze Pt:M.P/F.P Text:473F,245C
Vapor Pres:<1 @ 40C
Spec Gravity:0.95
Solubility in Water:INSOLUBLE
Appearance and Odor:DARK BLACK GREASE.
Stability
Stability Indicator/Materials to Avoid:YES
MAY REACT W/STRONG OXIDIZING AGENTS, SUCH AS CHLORATES, NITRATES,
PEROXIDES, ETC.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NORMAL COMBUST FORMS CARBON DIOXIDE,
WATER VAP & MAY PRDCE OXIDES OF NITROGEN. INCOMPLETE COMBUST CAN
PRODUCE (SUPDAT)
Disposal
Waste Disposal Methods:DISPOSAL MUST BE I/A/W FEDERAL, STATE & LOCAL
REGULATIONS . PLACE CONTAMINATED MATERIALS IN DISPOSABLE CONTAINERS
& DISPOSE OF IN A MANNER CONSISTENT W/APPLICABLE REGULATIONS.
CONTACT LOC ENVIRO N/HLTH AUTHS FOR APPROVED DISPOSAL OF THIS MATL.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.